AE-MIC AE-1152F 超低欧姆表 (0mΩ~1.5kΩ, 1mA~3A, <5V)

Range: Measuring range/ Resolution/ Current

     1mΩ: 0.0000mΩ~1.5000mΩ/ 0.1μΩ/ 3A

     10mΩ: 0.000mΩ~15.000mΩ/ 1μΩ/ 1A

     100mΩ: 0.00mΩ~150.00mΩ/ 10μΩ/ 1A

     1Ω: 0.0000Ω~1.5000Ω/ 100μΩ/ 100mA 

     10Ω: 0.000Ω~15.000Ω/ 1mΩ/100mA 

     100Ω: 0.00Ω~150.00Ω/ 10mΩ/ 10mA

     1kΩ: 0.0000kΩ~1.5000kΩ/ 100mΩ/ 1mA

     %: 0.01mΩ~1kΩ/±50.00%/ 0.01%[1nΩ]/ Refer to above

Voltage at terminals open: Below 5V

Measuring method: 4-terminal measurement [contact check is available]

Measuring time: 【Free running 】2～10times/sec.

                        【External start】about 9msec～400msec.

Comparator setting range: 

     mΩ test mode: 0~15000[both for low and high limit]

     % test mode: 50.00%[low limit:0～-50.00%、high limit:0～+50.00%]

Indication of comparator determination result: LO/GO/HI, LED display and buzzer.

Control signal: 

     input: START “L”[0V]→”H”[DC12V]⇒start

              HOLD “L”[0V]⇒hold / open or ”H”[DC12V]⇒free run

     output: LO/GO/HI, CONT-E and EOC/ open collector [40V/100mA max.]

Operation condition: 【Temp.】5℃~+40℃, 【Humidity】below 85%

Power supply: AC85V~265V,50~60Hz, about 60VA

Outer dimension: 333(W)×99(H)×300(D)mm (excluding protruding parts such as rubber legs, etc.)

Weight: About 3kg 

Option:

- RS-232C/ GP-IB/ Printer output (Only one kind of interface can be provided with the checker)

- Printer cable

- Short termination(Zero ohm standard resistor)